
(ArubaVMC) ^ (config-submode)# ip helper-address 192.168.1. The short preamble setting can be used, as this supports both short and long preambles.

Preamble settings The tests on the Aruba system were run with the short preamble setting. (ArubaVMC) ^ (config-submode)#switchport mode trunkĬonfigure IP Helper Address in VLAN 200 Interface (ArubaVMC) ^ (config) #interface vlan 200 Access Point Configuration Radio setting 802.11b or 802.11g When using the 802.11b/g band for the VoWiFi network, set the radio settings to 802.11b/g mixed mode. You may want to exclude unused address ranges.ĭo not create the DHCP Pool in Aruba VMC, and configured the DHCP Helper on the VLAN interface as belowĬonfigure ArubaVMC port as trunk ports (ArubaVMC) (config) #interface gigabitethernet 0/0/0 Maximum addresses configurable is 256 in the config path.Ĭurrently configured are 29 addresses. You will get the error message below if you are trying to create a DHCP Pool with large than 256 hosts (/24) (ArubaVMC) ^ (config-submode)#network 192.168.200.0 255.255.255.0įailed to add pool vlan_200 which has 254 addresses.

(ArubaVMC) ^ (config-submode)# dns-server 1.1.1.1 (ArubaVMC) ^ (config-submode)#ip address 192.168.200.1 255.255.255.0Ĭreate a DHCP Pool for VLAN 200 with smaller subnet (ArubaVMC) (config) #ip dhcp pool vlan_200 (ArubaVMC) ^ (config) #interface vlan 200
#MAC ADDRESS FOR ARUBA ACCESS POINTS LICENSE#
Please make sure to enable the feature bit to have the license take effect.Ĭreate a new VLAN 200 and IP Interface (ArubaVMC) (config) #vlan-name VLAN200 (ArubaVMC) #license add 55ywdiIV-xxxxxxxxxxxxxxxxxxxxxxx The limit for Access Points has been constrained to the platform limit (ArubaVMC) #license add hJVEcsqc-xxxxxxxxxxxxxxxxxxxxx The limit for MC-VA-RW has been constrained to the platform limit (ArubaVMC) #license add /GDy+uuW-Efxxxxxxxxxxxxxxxxx
